Links
       
 

Telecom Broker Network Links

MPLS VPNs transport layer 2 packets across the network and encapsulate transport protocols such as ATM, Ethernet, and SONET, allowing MPLS networks to seemlessly upgrade and replace legacy layer 2 networks without requiring network reconfiguration or using protocols higher than layer 2. In comparison, layer 3 VPNs must use the layer 3 Internet Protocol (IP).

An Internet T1 connection can support up to hundreds of desktop computers depending upon the applications and bandwidth being utilized.

Voice over IP (VoIP) sends voice data in packets using the Internet Protocol (IP) instead of analog waves as does plain old telephone service (POTS) lines.

The ADSL downstream receiving rate from the Internet usually varies from 1.5 to 9Mbps while the upstream sending rate usually varies from 16 to 640 Kbps.

Multi-Site National and Global Network Solutions: As your organization grows, so does the importance of telecommunications integration and coordination. For example, we can design a Virtual Private Network (VPN) or Multi-Protocol Label Switching (MPLS) Network that can connect all of your locations to enable sensitive data to flow back and forth at a high speed without the risk of interception. Call us at (888) 255-5859.

Multiprotocol Label Switching (MPLS) is a data communication standard that creates separate data paths for specific sequences of packets. Each packet is identified by a label that is encapsulated into each packet. This eliminates the need for Internet Protocol (IP) routers to look up the IP address of the next router in the network in order to forward the packet and as a result, speeds up the network.

A major feature of Internet over Ethernet is the ease in which you can upgrade from 1 Mbps to 1 Gbps. Simply call your Internet Service Provider (ISP) and ask for an upgrade and it can be provisioned almost in real time. This service is the future of Internet access for the foreseable future.

Digital Subscriber Line Service (DSL) has become a very popular Internet access service. This is because DSL uses the existing copper pairs that already exist between most customer premise offices and the local phone company central office (CO). A DSL connection is set up between a DSL modem at the customer premise and a DSL access multiplexer, or DSLAM, at the phone company central office. Both voice and data can be run across the same DSL connection by using a filter to separate voice traffic from Internet traffic.

You can compare MPLS to Frame Relay and ATM technologies.

If you are looking for high-quality, up-to-date information in a simple, easy-to-use format, click on the banner below and you will be taken to the Telecom Links web site where you are always just a mouse click away from information about the telecommunication services you are looking for.

MPLS makes it easier to manage network for quality of service (QoS) because packets can be prioritized by business importance. For example, Voice over IP (VoIP) can be prioritized over email and web browsing packets.